Chord DIN cables
.jpg)
High quality connections for equipment fitted with Din sockets
Avoids the compromise of adaptors
Entry level to high end
Full custom service available
Din connectors were once found on most hi-fi equipment. These days, RCA connectors have largely superseded them. Naim Audio continues to use and recommend Din connectors, as do a few other companies. Most of the Din cables we manufacture are used with either Naim Audio or older Quad equipment and we have an extensive knowledge of wiring configurations for many types of equipment. Chord CrimsonPlus, CobraPlus, Anthem 2 and Solstice interconnects are all available terminated with Din plugs. Whatever the level of equipment you need to connect, Chord can supply the right cable to guarantee the best performance. We will be happy to advise you on the most suitable cable for your set up.
You may have noticed that we use a modified five pin DIN plug - ie. it only has 3 pins. Following extensive research, we discovered that the two unconnected pins detract from the performance of the cable
When fitting your DIN cable, be careful to align the plug correctly with its socket as per the diagram. Misalignment may result in a missing channel. If this is the case, carefully withdraw the cable, check the alignment and re-insert
If you need further information or advice on this or any other aspect of hi-fi or home cinema cabling, please contact us by email or tel: +44 (0)1980 625700
