HDMI 1.3 Silver Plus (installation guide)

IMPORTANT NOTICE

This cable has been designed and manufactured to provide the highest level of performance and as such, requires to be handled and installed with sensible care and attention to routing.

All Chord Co cables come with a 10 year warranty. This warranty does not cover failures arising from modification or physical damage during installation or use.

All HDMI cables carry extremely high frequency signals (potentially up to 340 MHz). These signals, by their very nature, are easily corrupted or lost. To preserve these delicate signals our cables have been manufactured to very tight tolerances and rough cable pulling, crushing or kinking will alter these tolerances.

The red plug should be connected to the source component

To ensure you obtain full performance the following must be adhered to:

Check the ACTUAL CABLE you intend to install with the equipment you wish to connect before installing the cable.

If you are having these cables installed by a third party or within the fabric of a building, it is your responsibility to ensure that the cable is working satisfactorily to the required performance prior to installation with intended equipment.

You should also advise any third party on the quality, cost and performance of this cable and the fact that it requires to be installed with care.

Should you require further clarification on any of the above points, please contact us directly prior to installation.