Chord HDMI 1.3 Silver Plus- technical info  
The Chord HDMI Silver Plus was awarded Best Video Cable Cable at the What Hi-fi 2007 Awards. The HDMI Silver Plus 1.3 uses the same design principles applied to the original HDMI Silver Plus. The conductors are silver-plated oxygen free copper and whilst revising the cable to meet 1.3 specification, we also took the decision to increase the diameter of the conductors and at the same time improve the signal shielding. These revisions reduce interference, improve picture transfer and contrast. The HDMI Silver Plus 1.3 is available in lengths of 30m and 40m. For shorter lengths, use the NEW Chord HDMI Active
Tne 30m and 40m HDMI Silver Plus cables are fitted with an in-line signal amplifier. This guarantees that these longer runs of cable will meet 1.3 specifications and transfer a 1080p signal.
The improvements brought about by fitting a Chord HDMI cable to a screen or projector are easy to notice, even when using relatively short lengths. Over longer lengths however it becomes very apparent just how well these cables perform when compared to other HDMI cables. Any home cinema system requiring a long HDMI cable to connect a projector will really benefit from using the HDMI Silver Plus 1.3.
The HDMI Silver Plus 1.3 is available fitted with high quality gold-plated HDMI plugs. High performance DVI and MI adaptors are available.

 

Installation
The Chord HDMI Silver Plus 1.3 is fitted with a red HDMI plug at one end and a grey plug at the other end. When fitting this cable to your system it should be installed so that the red plug is at the source and the grey plug is at the screen.

 

IMPORTANT: The Chord HDMI Silver Plus 1.3 has been tested extensively with a wide range of equipment in order to ensure compatibility and consistent performance. We would however always recommend that if an HDMI cable (regardless of brand) is to be installed in a wall or ceiling, it should be tested with the equipment before installation.

Connections   back